|
|
Journals
|
|
Vinh Phoi Nguyen, Thien Ngon Dang, Chi Cuong Le, Dung-An Wang*, 2020,
Effect of coating thickness on fatigue behavior of
AISI 1045 steel with HVOF thermal spray and hard chrome electroplating,
Journal of Thermal Spray Technology,
October
2020, v. 29, 1968-1981. (SCI)
pdf
|
|
|
Pei-Lun Chang,
I-Ting Chi,
Ngoc Dang Khoa Tran, Dung-An
Wang*, 2020, Design and modeling of a
compliant gripper with parallel movement of jaws,
Mechanism and Machine Theory, October 2020, v. 152, 103942. (SCI)
pdf
|
|
|
Hong Van Tran,
Tien-Hoang Ngo,
Pei-Lun Chang, I-Ting Chi,
Ngoc Dang Khoa
Tran, Dung-An
Wang*, 2019,
A threshold gyroscope based on a bistable
mechanism, Mechatronics, November 2019, v. 63, 102280.
(SCI)
pdf
|
|
|
I-Ting Chi, Tien Hoang Ngo, Pei-Lun Chang, Ngoc Dang Khoa Tran,
Dung-AnWang*, 2019, Design of a bistable mechanism
with B-spline profiled beam for versatile switching forces,
Sensors and Actuators A-Physical, 1 August 2019, v. 294, pp. 173-184.
(SCI)
pdf
|
|
|
Zhi-Long Lin, Dung-An Wang, Ching-Ying Chee, Pai-Chen Lin*,
2019, The study of local Stress intensity factors
for kinked (and branched) cracks in commonly used spot weld specimens,
SAE International Journal of Materials and Manufacturing, July 2019, v. 12,
pp. 197-220. (Scopus)
|
|
|
Pai-Chen Lin*, Zhi-Long Lin, Dung-An Wang, 2019,
Three-dimensional finite element analyses of local stress intensity factor
solutions for kinked cracks of spot welds in commonly used specimens,
SAE International Journal of Advances and Current Practices in Mobility,
April 2019, v. 1, pp. 1522-1534. (Scopus)
|
|
|
Quang Khoa Dang,
Pei-Lun
Chang,
Thien Ngon Dang,
Fangbor Weng,
Jun-Yen Uan,
Dung-An Wang*,
2019, Ultrasonic spot welds of gas diffusion layer
to proton exchange membrane of fuel cells, Journal of
Materials Processing Technology, November 2018,
April 2019, v. 266, pp. 208-216.
(SCI)
pdf
|
|
|
Quang Khoa Dang, Pei-Lun Chang, Shih-Kang
Kuo,
Dung-An
Wang*, 2108,
Prediction of
springback and residual stress of a beam/plate subjected to three-point
bending, Journal of Mechanics of Materials and Structures,
November 2018, vol. 13, pp. 421-441. (SCI) pdf
|
|
|
Tien-Hoang
Ngo, Hong-Van Tran, Thang-An Nguyen, Thanh-Phong Dao, Dung-An Wang*,
2018,
Design and
kinetostatic modeling of a compliant gripper for grasp and autonomous
release of objects,
Advanced Robotics, August 2018, v. 32, pp. 717-735. (SCI)
pdf
|
|
|
Hong Van Tran, Tien Hoang Ngo,
Ngoc Dang Khoa
Tran,
Thien Ngon Dang,
Thanh-Phong Dao,
Dung-An
Wang*, 2018,
A threshold accelerometer based on a tristable
mechanism, Mechatronics, 2018, v. 53, pp. 39-55. (SCI)
pdf
|
|
|
Quoc-Dung
Truong,
Ngoc-Dang-Khoa Tran,
Dung-An
Wang*,
2017,
Design and characterization of a mouse trap based on a bistable mechanism,
Sensors and Actuators A-Physical, 1 November 2017, v. 267, pp. 360-375.
(SCI)
pdf
|
|
|
Ngoc Dang Khoa
Tran,
Dung-An
Wang*,
2017,
Design of a crab-like bistable mechanism for
nearly equal switching forces in forward and backward directions,
Mechanism and Machine Theory, September 2017, v. 115, pp. 114-129.
(SCI)
pdf
|
|
|
Dung-An Wang*, 2016,
Ultrasonic Bonding of Membrane-Electrode-Assemblies of Fuel Cells,
International Journal on Advanced Science, Engineering, Information and
Technology, v.
6, no. 3,
DOI:10.18517/ijaseit.6.3.804. (Scopus)
pdf
|
|
|
Huu-Tu Nguyen, Hai-Dang
Nguyen, Jun-Yen Uan, Dung-An Wang*, 2014, A
Nonrational B-Spline Profiled Horn with High Displacement Amplification
for Ultrasonic Welding, Ultrasonics, December 2014, v. 54, pp.
2063-2071. (SCI) pdf
|
|
|
Hong-Hua Ko, Dung-An Wang*,
2014, Analysis of magnetic assisted assembly of
meso-scale parts, International Journal of Automation and Smart
Technology, 2014, v. 4, pp. 67-76. pdf
|
|
|
Dung-An Wang*, Jyun-Hua Chen,
Huy-Tuan Pham, 2014, A tristable compliant
micromechanism with a series combination of two bistable mechanisms,
Mechanism and Machine Theory, January 2014, v. 71, pp. 27-39. (SCI) pdf
|
|
|
Dung-An Wang*, Hai-Dang Nguyen, 2014, A Planar Bézier Profiled Horn
for Reducing Penetration Force in Ultrasonic Cutting, Ultrasonics, January 2014, v. 54, pp.
375-384. (SCI) pdf
|
|
|
Hai-Dang Nguyen, Huy-Tuan Pham, Dung-An Wang*, 2013, A miniature pneumatic energy generator using Kármán
vortex street, Journal of
Wind Engineering and Industrial Aerodynamics, May 2013, v. 116, pp. 40-48. (SCI) pdf
|
|
|
Dung-An Wang*, Jyun-Hua Chen,
Huy-Tuan Pham, 2013, A constant-force bistable
micromechanism, Sensors
and Actuators A-Physical, January
2013, v. 189, pp. 481-487. (SCI) pdf
|
|
|
Dung-An Wang*, Chia-Wei Chao, Jyun-Hua
Chen, 2013, A miniature hydro energy generator based on pressure
fluctuation in Kármán vortex street, Journal
of Intelligent Material Systems and Structures, March 2013, v. 24, pp. 612-626. (SCI) pdf
|
|
|
Dung-An Wang,
Wei
Lo*,
Yhu-Jen
Hwu, 2013, Finite element analyses of
TMCP steel plates with consideration of edge masking,
Prodedia Engineering, v.
1, pp.
762-767.
|
|
|
Huy-Tuan
Pham*,
QC Tran,
Dung-An Wang, 2013, Numerical analysis of the
through-width vibration rolling process, International Journal of
Advanced Transport Phenomena, v.2, pp. 21-24.
|
|
|
Dung-An Wang*,
Chun-Yuan Chiu, Huy-Tuan Pham, 2012, Electromagnetic
energy harvesting from vibrations induced by Kármán vortex
street, Mechatronics, September 2012, v. 22, n. 6, pp.
746-756. (SCI)
pdf
|
|
|
Yue-Ting Chen, Dung-An Wang,
Jun-Yen Uan, Tsung-Hsien Hsieh, Te-Chang Tsai, 2012, Tensile strength and deformation microstructure of
Al-Mg-Si alloy sheet by through-width vibration rolling process,
Materials Science and Engineering A-Structural Materials: Properties,
Microstructure and Processing, August 2012, v. 551, pp. 296-300. (SCI)
|
|
|
Dung-An Wang*, Nine-Zeng Liu,
2011, A Shear Mode Piezoelectric Energy Harvester
Based on a Pressurized Water Flow, Sensors and Actuators A:
Physical, June 2011, v. 167, n. 2, pp. 449-458. (SCI) pdf
|
|
|
Huy-Tuan Pham, Dung-An Wang*,
2011, A quadristable compliant mechanism with a
bistable structure embedded in a surrounding beam structure, Sensors
and Actuators A: Physical, June 2011, v. 167, n. 2, pp. 438-448. (SCI) pdf
|
|
|
Huy-Tuan Pham, Dung-An Wang*,
2011, A constant-force bistable mechanism for
force regulation and overload protection, Mechanism and Machine
Theory, July 2011, v. 46, n. 7, pp. 899-909. (SCI) pdf
|
|
|
Dung-An Wang*, Fang-Wen Sheu,
Yen-Sih Chiu, 2011, In-plane vibration
characterization of microelectromechanical systems using acousto-optic
modulated partially incoherent stroboscopic imaging, Optics and Lasers in Engineering, July 2011, v. 49, n. 7, pp. 954-961.
(SCI) pdf
|
|
|
Dung-An Wang*, Wei-Yang Chuang,
Kei Hsu, Huy-Tuan Pham, 2011, Design of a
Bézier-Profile Horn for High Displacement Amplification,
Ultrasonics, February 2011, v. 51, pp. 148-156. (SCI) pdf
|
|
|
Dung-An Wang*, Chia-Wei Chao,
Pai-Chen Lin, Jun-Yen Uan, 2010, Mechanical
Characterization of Friction Stir Spot Microwelds, Journal of
Materials Processing Technology, November 2010, v. 210, pp. 1942-1948.
(SCI) pdf
|
|
|
D.-A. Wang*, K.-H. Cheng, 2010,
Electromagnetic Energy Harvesting from Flow
Induced Vibration, Microelectronics Journal, June 2010, v.
41, pp. 356-364. (SCI) pdf
|
|
|
D.-A. Wang*, H.-H. Ko, 2010, Piezoelectric energy harvesting from flow induced
vibration, Journal of Micromechanics and Microengineering,
Feb. 2010, v. 20, 025019. (SCI) pdf
|
|
|
P.-C. Lin*, D.-A. Wang, 2010, Geometric Functions of Stress Intensity Factor Solutions
for Spot Welds in U-Shape Specimens, International Journal of
Solids and Structures, March 2010, v. 47, pp. 691-704. (SCI)
|
|
|
D.-A. Wang*, B. Liao, 2010, Shaking assisted self-assembly of rectangular-shaped
parts, Journal of Materials Processing Technology, Jan 2010,
v. 210, pp. 343-350. (SCI) pdf
|
|
|
D.-A. Wang*, W.-Y. Chuang, K.
Hsu, H.-T. Pham, 2009, Design and analysis of a Bezier-profile
horn, Journal of Engineering, National Chung Hsing
University, Nov. 2009, v. 20, pp. 161-169. pdf
|
|
|
R.-H. Ma, D.-A. Wang, T.-H.
Hsueh, C.-Y. Lee, 2009, A MEMS-based flow rate and
flow direction sensing platform with integrated temperature compensation
scheme, Sensors, July 2009, v. 9, pp. 5460-5476. (SCI)
|
|
|
D.-A. Wang*, H.-H. Ko, 2009, Magnetic-assisted self-assembly of rectangular-shaped
parts, Sensors and Actuators A: Physical, April 2009, v. 151,
pp. 195-202. (SCI) pdf
|
|
|
D.-A. Wang*, H.-T. Pham, Y.-H.
Hsieh, 2009, Dynamical switching of an
electromagnetically driven compliant bistable mechanism, Sensors
and Actuators A: Physical, Jan 2009, v. 149, pp. 143-151. (SCI) pdf
|
|
|
D.-A. Wang*, C.-H. Chen, 2009, Fatigue Lives of Friction Stir Spot Welds in Aluminum
6061-T6 Sheets, Journal of Materials Processing Technology,
Jan 2009, v. 209, pp. 367-375. (SCI) pdf
|
|
|
D.-A. Wang*, C.-H. Cheng, Y.-H.
Hsieh, Z.-X Zhang, 2007, Analysis of an
Annular PZT Actuator for a Droplet Ejector, Sensors and
Actuators A: Physical, July 2007, v. 137, pp. 330-337. (SCI) pdf
|
|
|
D.-A.
Wang*, S.-C. Lee, 2007, Microstructures and Failure
Mechanisms of Friction Stir Spot Welds of Aluminum 6061-T6 Sheets, Journal
of Materials Processing Technology, May 2007, v. 186, pp. 291-297.
(SCI) pdf
|
|
|
D.-A.
Wang*, Y-P
Lee, 2007,
Bond Strength and Fatigue Tests of Porcelain on Pure Titanium, Journal
of Biomechanics, July 2007, v. 40, supplement 2, p. S372. (SCI)
pdf
|
|
|
P.-C.
Lin, D.-A. Wang, J. Pan, 2007, Mode I Stress
Intensity Factor Solutions for Spot Welds in Lap-Shear Specimens, International
Journal of Solids and Structures, Feb 2007, v. 44, pp. 1013-1037. (SCI)
|
|
|
D.-A. Wang, J. Pan*, 2006, A Non-Quadratic Yield Function for Polymeric Foams,
International Journal of Plasticity, March 2006, v. 22, pp, 434-458. (SCI) pdf
|
|
|
D.-A. Wang, J. Pan*, 2005, A Computational Study of Local Stress Intensity Factor
Solutions for Kinked Cracks near Spot Welds in Lap-Shear Specimens,
International Journal of Solids and Structures, v. 42, pp. 6277-6298. (SCI)
pdf
|
|
|
D.-A. Wang, J. Pan*, 2005, Geometry Functions of Stress Intensity Factor Solutions
for Spot Welds in Lap-Shear Specimens, International Journal
of Solids and Structures, v. 42, pp. 6299-6318. (SCI) pdf
|
|
|
D.-A. Wang, S.-H. Lin, J. Pan,
2004, Stress Intensity Factors
for Spot Welds and Associated Kinked Cracks in Cup Specimens,
International Journal of Fatigue, v. 27, pp. 581-598. (SCI) pdf
|
|
|
D.-A. Wang, S.-H. Lin, J. Pan,
2004, Local Stress Intensity
Factors for Kinked Cracks in Spot Weld Cup Specimens, SAE 2004
Transactions Journal of Materials and Manufacturing, Paper No.
2004-01-0816. (EI)
|
|
|
D.-A. Wang, J. Pan*, 2004, Development of a
Macroscopic Yield Function for Polymeric Foams, SAE 2004
Transactions Journal of Materials and Manufacturing, Paper No.
2004-01-0465. (EI)
|
|
|
D.-A. Wang, J. Pan, S-D. Liu,
2004, Modified Anisotropic
Gurson Yield Criterion for Porous Ductile Sheet Metals with Planar
Anisotropy, International Journal of Damage Mechanics, v. 13,
pp. 7-33. (SCI) pdf
|
|
|
J. Pan, S. Oh, D-A Wang, W.-Y.
Chien, T.-Y. Pan, J. Wang, 2003, Failure Mechanisms of
Sandwich Specimens with Epoxy Foam Cores under Bending Conditions,
SAE 2003 Transactions Journal of Materials and Manufacturing, Paper No.
2003-01-0327. (EI)
|
|
|
D.-A. Wang, W.Y. Chien, K.C.
Liao, J. Pan, S.C. Tang, 2003, A Gurson Yield Function
for Anisotropic Porous Sheet Metals and its Applications to Failure
Prediction of Aluminum Sheets, The Chinese Journal of
Mechanics-Series A, v. 19, pp. 161-168. (SCI)
|
|
|
K. Saitou, D.-A. Wang, S.J.
Wou, 2000, Externally Resonated
Linear Microvibromotor for Microassembly, Journal of
Microelectromechanical Systems, v. 9, pp. 336-346. (SCI)
|
Conferences
|
|
Tien Hoang Ngo, Ngoc Dang Khoa Tran,
Dung-An Wang, 2018, Design
of a Bistable Mechanism for Symmetric Force Output,
The
Fourth International Conference
on Green Technology and
Sustainable Development, Nov.
23-24, 2018, Ho Chi Minh City, Vietnam.
(Scopus)
|
|
|
Quang Khoa Dang, Dang Thien Ngon, Fangbor Weng, and Dung-An Wang, 2017,
Ultrasonic Spot Welds
of
Carbon Paper and Proton – Exchange-Membrane for Applications in Membrane-Electrode-Assemblies
of Fuel Cells, Proceedings of the 2017
International Conference on System
Science and Engineering (ICSSE 2017), July 21-23, 2017, Ho Chi Minh
City, Vietnam. (Scopus)
|
|
|
Thang-An
Nguyen,
Dung-An Wang, 2016,
A Gripper Based on a Compliant Bitable Mechanism for Gripping and Active
Release of Objects, Proceedings of the 2016 annual
International Conference on Manipulation, Automation and Robotics at Small
Scales,
July
18-22, 2016,
Paris,
France. (Scopus)
|
|
|
Dung-An Wang, 2015, Ultrasonic Bonding of
Membrane-Electrode-Assemblies of Fuel Cells, Proceedings of the
Third International Conference Sustainable
Agriculture, Food and Energy,
Nov.
17-20, 2015, Ho
Chi Minh City, Vietnam.
|
|
|
Po-Wei Tsao, Dung-An Wang, 2014, Optimal Frequency Design of a Bistable
Mechanism, Proceedings of the 31th National
Conference on Mechanical Engineering of CSME, December 6-7, 2014, Taichung,
Taiwan.
|
|
|
Pei-Lun Chang, Wei Lo, Yhu-Jen Hwu, Dung-An Wang, 2014, Analysis of
Accelerated Cooling of TMCP Steel Plates with Edge Masking,
Proceedings of the 31th National Conference on Mechanical
Engineering of CSME, December 6-7, 2014, Taichung, Taiwan.
|
|
|
Pei-I Hung, Dung-An Wang, 2014, Optimal Design of a Bistable Electrostatic
Energy Harvester, Proceedings of the 31th National
Conference on Mechanical Engineering of CSME, December 6-7, 2014, Taichung,
Taiwan.
|
|
|
Chang-Lung Tsai, Dung-An Wang, 2014, Optimal Design
of an Out-of-Plane Motion Mechanism Using a Genetic Algorithm
, Proceedings of the 31th National Conference on
Mechanical Engineering of CSME, December 6-7, 2014, Taichung, Taiwan.
|
|
|
Huu-Tu Nguyen, Dung-An Wang, 2014, Experimental characterization of a bistable energy
harvester, Proceedings of the 2014 Workshop on Consumer Electronics
(WCE 2014), Nov. 29, 2014, Tung Hai University, Taichung Taiwan.
|
|
|
Huu-Tu Nguyen, Bach Duong Pham, Dung-An Wang, 2014, Broadband Energy Harvesting through a Tristable
Mechanism, Proceedings of the 2014 International Conference on Green
Technology and Sustainable Development (GTSD 2014), Oct. 30-31, 2014, Ho
Chi Minh City, Vietnam.
|
|
|
Huu-Tu Nguyen, Perry, Hong, Dung-An Wang, 2014, Design of a bistable electrostatic vibration energy
harvester, Proceedings of the Asia-Pacific
Symposium on Applied Electromagnetics and Mechanics 2014, 23 - 25 July 2014,
Taichung, Taiwan.
|
|
|
Huu-Tu Nguyen, Dung-An Wang, 2014, Investigations of a Bistable Energy Harvester by
Harmonic Balance Method, Proceedings of the International Symposium
on Green Manufacturing and Applications (ISGMA 2014), June 24-28, 2014,
Pusan, Korea.
|
|
|
Huu-Tu Nguyen, Dung-An Wang, 2014, Analysis of a Tristable Energy Harvester,
Proceedings of the 22ed National Conference on Sound and
Vibration (CSSV 2014), June 7, 2014, Changhua, Taiwan.
|
|
|
Wei-Chung Lo, Bun-Wen Lin, Dung-An Wang, 2013, Analyses of a Compliant Microgripper Integrated with a
Plunger for Active Release of Microobjects, Proceedings of The 16th
National Conference on Mechanism and Machine Design (CSMMT 2013), November
1, 2013, Hsinchu, Taiwan.
|
|
|
Dung-An Wang, Wei Lo, Yhu-Jen Hwu, 2013, Finite element analyses of TMCP steel plates with
consideration of edge masking, Proceedings of The 37th
National Conference on Theoretical and Applied Mechanics, November 8-9,
2013, Hsinchu, Taiwan.
|
|
|
Dung-An Wang, Wei Lo, Wei-Yi Chien and Yhu-Jen Hwu,
2013, Computational Modeling of a Jominy Test,
Proceedings of the 29th National Conference on Mechanical
Engineering of CSME, December 6-7, 2013, I-Lan, Taiwan.
|
|
|
Huu Tu Nguyen, Dung-An Wang, 2013, Design and Analysis of A Nonrational B-Spline Profiled Horn
for High Displacement Amplification, 2013
Joint UFFC, EFTF, and PFM Symposium, July 22-25, 2013, Prague Convention
Center, Prague, Czech Republic. (Scopus)
|
|
|
Dung-An WANG and Hai-Dang Tam NGUYEN, 2013, A Bezier Profiled Horn for Reducing Penetration Force
with Applications in Surgery, 15th Asia Pacific Vibration
Conference, 2-6 June, 2013, ICC Jeju, Korea.
|
|
|
Hai-Dang Tam Nguyen, Dung-An Wang, 2012, Electromagnetic Multi-Modal Energy Harvesting Using a Bézier-Profile Plate, Proceedings of the 29th
National Conference on Mechanical Engineering of CSME, December 7-8, 2012,
Kaohsiung, Taiwan.
|
|
|
Huu-Tu Nguyen, Huy-Tuan Pham and Dung-An Wang, 2012, A Switching Scheme for a Compliant Bistable Mechanism
Using Harmonic Forcing, Proceedings of the 29th National
Conference on Mechanical Engineering of CSME, December 7-8, 2012,
Kaohsiung, Taiwan.
|
|
|
Zheng-Yan Lin, Dung-An Wang, 2012, A Silicon Ultrasonic Horn with a Bézier Profile for
Surgical Applications, International
Conference on Green Technology and Sustainable Development, September
29-30, 2012, HoChiMinh City, Vietnam.
|
|
|
Qiao-Dong Ji, Dung-An Wang, 2012, Ultrasonically Actuated Silicon Horn with a Bézier profile, International Conference on
Green Technology and Sustainable Development, September 29-30, 2012,
HoChiMinh City, Vietnam.
|
|
|
Hai-Dang Tam Nguyen, Dung-An Wang, 2012, Design of an Ultrasonic Steel Horn with a Bézier profile, International Conference on
Green Technology and Sustainable Development, September 29-30, 2012, HoChiMinh City, Vietnam.
|
|
|
Jyun-Hua Chen, Dung-An Wang, 2012, In-Plane Force Sensing of Microelectromechanical Systems, International Conference on
Green Technology and Sustainable Development, September 29-30, 2012,
HoChiMinh City, Vietnam.
|
|
|
Hai-Dang Tam Nguyen, Huy-Tuan Pham and Dung-An Wang, A Miniature Wind Generator Based on Pressure Fluctuation
in Kármán Vortex Street, International Workshop on Agricultural
and Bio-systems Engineering, December 2-3, 2011, HoChiMinh City,
Vietnam.
|
|
|
Dung-An Wang, Huy-Tuan Pham, Chia-Wei Chao, Jerry M.
Chen, 2011, A Piezoelectric Energy Harvester Based
on Pressure Fluctuations in Kármán Vortex Street, World Renewable
Energy Congress 2011, 8-11 May 2011, Linköping, Sweden.
|
|
|
Huy-Tuan Pham, Chun-Yuan Chiu, Dung-An Wang, 2011, An Electromagnetic Energy Harvester Based on Pressure
Fluctuations in Kármán Vortex Street, The First International Symposium
on Automotive and Convergence Engineering, 19-21 Jan 2011, Hochiminh City,
Vietnam.
|
|
|
D.-A. Wang and K.-H. Chang, 2009, Energy Harvesting from Flow Induced Vibration by
Electromagnetic Induction, Proceedings of the 26th National
Conference on Mechanical Engineering, The Chinese Society of Mechanical
Engineers, Nov 20-21 2009, Tainan, Taiwan.
|
|
|
D.-A. Wang and H.-H. Ko, 2009, Design
and Analysis of a Piezoelectric Energy Harvester, Proceedings of
the 33rd National Conference on Theoretical and Applied Mechanics, Society
of Theoretical & Applied Mechanics, November 13-14, Miao-Li,
Taiwan.
|
|
|
P.-C. Lin, and D.-A. Wang, 2009, Effects of specimen width and specimen length on stress intensity
factor solutions for spot welds in u-shape specimens, SAE Technical Paper 2009-01-0029, April
2009, Society of Automotive Engineers, Warrendale, Pennsylvania. (Scopus)
|
|
|
B. Liao, and D.-A. Wang, 2008, Self-Assembly
of Rectangular-Shaped PZT Actuators on Glass Substrates with a Copper
Hydrophobic Layer, Asia-Pacific
Conference on Transducers and Micro-Nano Technology 2008, June 22-25,
Tainan, Taiwan.
|
|
|
H.-T. Pham, and D.-A. Wang, 2008, A Microswitch Actuated by
Bistable Micromechanisms, Asia-Pacific Conference on Transducers and Micro-Nano
Technology 2008, June 22-25, Tainan, Taiwan.
|
|
|
D.-A. Wang, and H.-T. Pham,
2008, Vibration-Actuated Bistable
Micromechanism for Microassembly, Technical
Proceedings of the 2008 Nanotechnology Conference and Trade Show, June 1-5, 2008, Volume 3,
pp. 639-642, Boston, Massachusetts.
(Scopus)
|
|
|
D.-A. Wang, C.-H. Cheng, H.-T. Pham, and
Z.-B. Chou, 2007, A Shear Mode PZT Actuator for a
Micro-Ejector, The 2007 ASME
Applied Mechanics and Materials Conference (McMat 2007), June
2007, Austin, Texas.
|
|
|
D.-A.
Wang, C.-H. Cheng , Y.-H. Hsieh, and T.-H. Chang, 2007, An Angular PZT Actuator for a Micro-Ejector, The 2007 ASME Applied Mechanics and
Materials Conference (McMat 2007), June 2007, Austin, Texas.
|
|
|
D-A Wang
and Y-P Lee, 2007, Bond Strength and Fatigue Tests
of Porcelain on Pure Titanium, The International Society of
Biomechanics 2007 Congress, July 2007, Taipei, Taiwan.
|
|
|
D.-A. Wang and J. Pan, 2006, Plastic Yielding of an Anisotropic Aluminum Alloy under
Plane Stress Conditions, The
Twelfth International Symposium on Plasticity and Its Current Applications,
pp. 313-315, July 2006, Halifax, Nova Scotia, Canada.
|
|
|
P.-C. Lin, J. Pan and D.-A.
Wang, 2006, Analytical Solution of Mode I Stress
Intensity Factor for Spot Welds in Lap-Shear Specimens, SAE
Technical Paper 2006-01-0535, April 2006, Society of Automotive
Engineers, Warrendale, Pennsylvania.
|
|
|
D.-A. Wang, S.-C. Lee and
K.-Y. Hsieh, 2005, Microstructures and Failure
Mechanisms of Spot Friction Welds in Lap-Shear Specimens of Aluminum
6061-T6 Sheets, Proceedings of IMECE 2005: 2005 ASME
International Mechanical Engineering Congress and Exposition, November
5-11 2005, Orlando, Florida.
|
|
|
D.-A. Wang, S.-C. Lee and
C.-S. Hung, 2005, A Finite Element Analysis of a
Microcantilever Impactor, 2005 Precision Machinery and Manufacturing
Technology Conference, May 20-22, Pingtung, Taiwan.
|
|
|
D.-A. Wang, K.-Y. Hsieh and
Y.-M Hsu, 2005, A Pesudo-Rigid-Body Model of a
Microcantilever Impactor, 2005 Precision Machinery and
Manufacturing Technology Conference, May 20-22, Pingtung, Taiwan.
|
|
|
D.-A. Wang, K.-Y. Hsieh and
C.-H. Chiang, 2005, Orienting Microparts Using
Passive Fences and Vibratory Agitation, Proceedings of Automation
2005, The Eighth International Conference on Automation Technology
Conference, May 5-6, 2005, Taichung, Taiwan.
|
|
|
D.-A. Wang, S.-C. Lee and
C.-H. Chiang, 2005, D,
Proceedings of Automation 2005, The Eighth International Conference on
Automation Technology Conference, May 5-6, 2005, Taichung, Taiwan
|
|
|
D.-A. Wang and J. Pan, 2005, A Non-Quadratic Yield Function for Polymeric Foams,
The Eleventh International Symposium
on Plasticity and Its Current Applications, January 2005, pp. 562-564,
Hawaii.
|
|
|
D.-A. Wang and J. Pan, 2005, Stress Intensity Factors for Kinked Cracks near Spot
Welds in Lap-Shear Specimens, SAE
Technical Paper2005-01-0900, April 2005, Society of Automotive
Engineers, Warrendale, Pennsylvania.
|
|
|
D.-A. Wang and J. Pan, 2005, Effects of Specimen Width and Overlap Length on Stress
Intensity Factors of Spot Welds in Lap-Shear Specimens, SAE Technical Paper2005-01-0902,
April 2005, Society of Automotive Engineers, Warrendale, Pennsylvania.
|
|
|
D.-A. Wang, 2004, Development of a Constitutive Model for Polymeric Foams,
Proceedings of CTAM28: The 28th
National Conference on Theorectical and Applied Mechanics, Dec 3-4,
2004, Taipei, Taiwan, pp. 619-625.
|
Patents
|
|
具有非接觸式釋放功能的穩態夾持系統(發明第I615350號),
2018.
|
中華民國專利 發明專利2018-2036
|
|
|
穩態恆力系統之撓性元件(發明第I585594號),
2017.
|
中華民國專利
發明專利2017-2036
|
|
|
基於薄平板的能量收集裝置(發明第I518243號),
2015.
|
中華民國專利 發明專利 2016-2033
|
|
|
主動式穩態夾持釋放系統(發明第I515162號),
2015.
|
中華民國專利 發明專利 2016-2033
|
|
|
陣列式動能擷取裝置(發明第I494504號), 2015.
|
中華民國專利 發明專利2015-2031
|
|
|
基於Ｂ－樣條曲線的變幅桿(發明第I511802號),
2015.
|
中華民國專利
發明專利2015-2033
|
|
|
能量擷取裝置(發明第I489041號), 2015.
|
中華民國專利 發明專利2015-2031
|
|
|
電能供應裝置及具有電能供應裝置的鞋墊(發明第I452974號),
2014.
|
中華民國專利 發明專利2014-2031
|
|
|
具有保護機制的雙穩態恆力系統(發明第I465725號),2014.
|
中華民國專利 發明專利2014-2030
|
|
|
四穩態恆力系統(發明第I421984號),2014.
|
中華民國專利 發明專利2014-2031
|
|
|
加速液體滲透土層的方法(發明第I395858號),
2013.
|
中華民國專利 發明專利2013-2030
|
|
|
非接觸式對位方法及裝置(發明第I405292號), 2013.
|
中華民國專利 發明專利2013-2029
|
|
|
貝茲曲線超聲波放大器之製造方法及其製品(發明第I385640號), 2013.
|
中華民國專利 發明專利2013-2029
|
|
|
微移距光學測量系統(發明第I401410號),
2013.
|
中華民國專利 發明專利2013-2030
|
|
|
振動驅動的微定位機構(發明第I364807號), 2012.
|
中華民國專利 發明專利2012-2028
|
|
|
用於成形奈米粉末之裝置(發明第I335241號),
2011.
|
中華民國專利 發明專利2011-2028
|
|
|
奈米粉末成型裝置及其成形方法(發明第I330547號), 2010.
|
中華民國專利 發明專利2010-2028
|
|
|
微小元件的定位方法及其微定位器(發明第I327129號), 2010.
|
中華民國專利 發明專利2010-2027
|
Books
|
|
J Pan, K Sripichai, P–C Lin, D–A Wang, S-H Lin, Mechanics modeling of spot welds under general loading
conditions and applications to fatigue life predictions. In
Failure mechanisms of advanced welding processes, (Cambridge, UK:
Woodhead Publishing Limited, 2010), Chapter 1.
|
|
|
|
Seminars
|
|
Origami in action,
Department of Mechanical Engineering,
National
Chung Cheng University,
Oct.
30, 2019.
|
|
|
Origami in MEMS,
Department of Electrical Engineering,
National
Changhua University of Education,
Oct.
4, 2019.
|
|
|
Applications of
Compliant Mechanisms,
Department of Mechatronics Engineering,
National
Changhua University of Education,
Dec.
8, 2016.
|
|
|
Energy Harvesting Technologies,
Department of Electrical Engineering,
National Changhua University of Education,
May
27, 2016.
|
|
|
Applications of Finite Element Analysis in Engineering,
Department of Aerospace and Systems Engineering, Feng Chia
University,
May 7, 2014.
|
|
|
Prediction of Distortion in Steel Plate after
Spray Quenching
, China Steel Corporation (中鋼公司), Aug 16, 2013.
|
|
|
Investigation of
phase transformation and residual stress in steel strip quenching process, China Steel Corporation (中鋼公司), Feb 6, 2013.
|
|
|
Failure mechanisms
of sandwich specimens with epoxy foam cores under bending conditions, China Steel Corporation (中鋼公司), Feb 4, 2012.
|
|
|
Design of
ultrasonic horns,
Precision Machinery Research & Development Center (精密機械研究發展中心), May 3-5, 2011.
|
|
|
Energy harvesting
technology, Department of
Automatic Control Engineering, Feng Chia University (逢甲大學自動控制系), Nov 9, 2010, PM 15:30.
|
|
|
Dynamical switching
of a chevron-type bistable mechanism, Department of Electrical Engineering, National
Chi Nan University (國立暨南大學電機工程系), Oct 23, 2008.
|
|
|
Microassembly
technology, Department of
Mechatronics Engineering, National Changhua University of Education (國立彰化師範大學機電工程系), May 22, 2008.
|
|
|
Microvibromotor for
microassembly, Department
of Electrical Engineering, Tunghai University (東海大學電機工程系), March 20, 2008.
|
|
|
Microassembly with
applications in microsystem,
Institute of Nanoengineering & Microsystems, National Cheng Kung
University (國立成功大學化學工程系), Feb 27, 2008.
|
|
|
Microassembly, Institute of Nanoengineering &
Microsystems, National Tsing Hua University (國立清華大學奈米工程與微系統研究所), Dec 24, 2007, PM 15:30.
|
|
