期刊論文/Periodocal


國際期刊論文/INTERNATIONAL
66 Shokouh Attarilar, Mahmoud Ebrahimi*, Tsung-Hsien Hsieh, Jun-Yen Uan**, Ceren Göde, “An insight into the vibration-assisted rolling of AA5052 aluminum alloy: Tensile strength, deformation microstructure, and texture evolution”, Materials Science and Engineering: A, Available online 4 November 2020, 140489.
(IF= 4.625 METALLURGY & METALLURGICAL ENGINEERING, 7/79)
65 Yu-Chi Chang, Jun-Yen Uan*, “Mg17Al12 phase in magnesium alloy waste facilitating the Ni2+ reduction in nickel plating wastewater”, Journal of Hazardous Materials, 403 (2021), pp. 123556.
(IF= 9.038 ENVIRONMENTAL SCIENCES, 8/265)
64 Liang-Wei Su, Dan-Jae Lin*, Jun-Yen Uan**, “Novel dental resin composites containing LiAl-F layered double hydroxide (LDH) filler: Fluoride release/recharge, mechanical properties, color change, and cytotoxicity”, Dental Materials, 35 (2019), pp. 663-672.
(IF= 4.495 DENTISTRY, ORAL SURGERY & MEDICINE, 4/91)
63 Quang-Khoa Dang, Pei-Lun Chang, Thien-Ngon Dang, Fangbor Weng, Jun-Yen Uan and Dung-An Wang*, “Ultrasonic Spot Welds of Gas Diffusion Layer to Proton Exchange Membrane of Fuel Cells”, Journal of Materials Processing Technology, 266 (2019), pp. 208-216.
(IF= 3.647, ENGINEERING, INDUSTRIAL, 7/47)
62 Song-Lin Li, Jenn-Ming Song, Jun-Yen Uan*, “Mg-Mg2X (X=Cu, Sn) eutectic alloy for the Mg2X nano-lamellar compounds to catalyze hydrolysis reaction for H2 generation and the recycling of pure X metals from the reaction wastes”, Journal of Alloys and Compounds, 772 (2019), pp. 489-498.
(IF= 3.779, METALLURGY & METALLURGICAL ENGINEERING, 4/75)
61 Yung-Feng Lung, Ying-Sui Sun, Chun-Kai Lin, Jun-Yen Uan*, Her- Hsiung Huang*, “Synthesis of Mg-Fe-Cl hydrotalcite-like nanoplatelets as an oral phosphate binder: evaluations of phosphorus intercalation activity and cellular cytotoxicity”, Scientific Reports, 6:32458 (2016).
(IF= 4.122, MULTIDISCILPINARY SCIENCE, 12/64)
60 Wang-Chih Chen, Hung-Mao Lin, Jun-Yen Uan*, “A study on the formation and the characterization of a self-lubricated carbide layer on AA6082 Al-Mg-Si aluminum alloy by electrical discharge alloying process”, Transactions of Nonferrous Metals Society of China, 26 (2016), pp. 3205-3218.
(IF= 2.003, MATERIALS SCIENCE, MULTIDISCIPLINARY, 61/231)
59 Yung-Feng Lung, Yu-Fan Syu, Meng-Chang Lin, Jun-Yen Uan*, “Converting waste magnesium scrap into anion-sorptionable nanomaterials: synthesis and characterization of Mg-Al-Cl hydrotalcite-like compound by hydrolysis and chemical conversion treatment in aqueous chloride solutions”, RSC Advances, 4 (2014), pp. 57646-57657.
(IF= 3.84, CHEMISTRY, MULTIDISCIPLINARY, 33/157)
58 Huu-Tu Nguyen, Hai-Dang Nguyen, Jun-Yen Uan and Dung-An Wang*, “A Nonrational B-Spline Profiled Horn with High Displacement Amplification for Ultrasonic Welding.”,Ultrasonics, 54 (2014), pp. 2063-2071.
(IF= 1.942, ACOUSTICS, 6/31)
57 Meng-Chang Lin, Shang-Qiu Lin and Jun-Yen Uan*, “Effect of annealing temperature on the microstructure and mechanical properties of an as-rolled Mg-9wt.% Li-3wt.% Al-1wt.% Zn alloy sheet.”, Frontiers of Materials Science, 8 (2014), pp. 271-280.
(IF= 1, MATERIALS SCIENCE, MULTIDISCIPLINARY, 176/259)
56 Meng-Chang Lin, Fu-Tsung Chang, and Jun-Yen Uan*, “Aqueous Li+/Al3+ alkaline solution for CO2 capture and the massive Li–Al–CO3 hydrotalcite precipitation during the interaction between CO2 gas and the Li+/Al3+ aqueous solution.”, Journal of Materials Chemistry A, 1 (2013), pp. 14773-14782.
(IF= 6.626, MATERIALS SCIENCE, MULTIDISCIPLINARY, 22/251)
55 Yen-Hsun Chi, Jun-Yen Uan*, Meng-Chang Lin, Yu-Li Lin, and Jin-Hua Huang*, “Preparation of a novel Pd/layered double hydroxide composite membrane for hydrogen filtration and characterization by thermal cycling”, international Journal of Hydrogen Energy, 38 (2013), pp. 13734-13741.
(IF= 2.93, ELECTROCHEMISTRY, 7/27)
54 Song-Lin Li, Hung-Mao Lin and J.Y. Uan*,"Production of an Mg/Mg2Ni lamellar composite for generating H2 and the recycling of the post-H2 generation residue to nickel powder", International Journal of Hydrogen Energy, 38 (2013), pp. 13520-13528.
(IF= 4.054, ENERGY & FUELS, 12/79)
53 J.H. Syu, J.Y. Uan*, M.C. Lin and Z.Y. Lin, "Optically transparent Li-Al-CO3 layered double hydroxide thin films on an AZ31 Mg alloy formed by electrochemical deposition and their corrosion resistance in a dilute chloride environment",Corrosion Science, 68 (2013), pp. 238-248.
(IF= 3.734, METALLURGY & METALLURGICAL ENGINEERING, 2/75)
52 C.F. Lin, P.H. Tsai, Z.Y. Lin, J.Y. Uan, C.M. Lin, C.C. Yang and B.C. Shieh, "Solution-processed Li–Al Layered-double-hydroxide Platelet Structures for High Efficiency InGaN Light Emitting Diodes", Optics Express, 20 (2012), pp. 669-677.
(IF= 3.587, OPTICS, 5/77)
51 K. Stambekova, H. M. Lin and J.Y Uan*, "Microstructural and Corrosion Characteristics of Alloying Modified Layer on 5083 Al Alloy by Electrical Discharge Alloying Process with Pure Silicon Electrode", Materials Transactions, 53, (2012) pp. 1436-1442.
(IF= 0.699, METALLURGY & METALLURGICAL ENGINEERING, 27/75)
50 Y.T. Chen, D.A. Wang, J.Y. Uan*, T.H. Hsieh, T.C. Tsai, "Tensile strength and deformation microstructure of Al-Mg-Si alloy sheet by through-width vibration rolling process", Materials science & engineering A, 551 (2012), pp. 296-300.
(IF= 2.003, MATERIALS SCIENCE, MULTIDISCIPLINARY, 61/231)
49 M.C. Lin, J.Y. Uan* and T.C. Tsai, “Fabrication of AlLi and Al2Li3/Al4Li9 Intermetallic Compounds by Molten Salt Electrolysis and their Application for Hydrogen Generation from Water”, International Journal of Hydrogen Energy, 37 (2012), pp. 13731-13736.
(IF= 4.054, ENERGY & FUELS, 12/79)
48 S.H. Yu, J.Y. Uan* and T.L. Hsu, “Effects of concentrations of NaCl and organic acid on generation of hydrogen from magnesium metal scrap”, International Journal of Hydrogen Energy, 37 (2012), pp. 3033-3040.
(IF= 4.054, ENERGY &FUELS, 12/79)
47 S. Kuralay, H.M. Lin, J.Y. Uan*, “Surface modification of 5083 Al alloy by electrical discharge alloying processing with a 75 mass% Si-Fe electrode”, Applied surface science, 258 (2012), pp. 4483-4488.
(IF= 2.103, MATERIALS SCIENCE, COATINGS & FILMS, 2/18)
46 T.T. Tseng, H.M. Wu, C.N. Chen, C.C. Cheng and J.Y Uan, W. Wu, W.J. Tseng*, “Refractory Filler Sands with Core-Shell Composite Structure for the Tap hole Nozzle in Slide-Gate System of Steel Ladles”, Ceramics International, 38 (2012), pp. 967-971.
(IF= 1.751, MATERIALS SCIENCE, CERAMICS, 3/25)
45 J.K. Lin, K.L. Jeng and J.Y. Uan*, “Crystallization of a chemical conversion layer that forms on AZ91D magnesium alloy in carbonic acid”, Corrosion Science, 53 (2011), pp. 3832-3839.
(IF=3.734, METALLURGY & METALLURGICAL ENGINEERING, 2/75)
44 T.T. Tseng, J.Y. Uan and W.J. Tseng*, “Synthesis, Microstructure, and Pgotocatalysis of In2O3 Hollow Particles”, Ceramics International, 37 (2011), pp. 1775-1780.
(IF= 1.751, MATERIALS SCIENCE, CERAMICS, 3/25)
43 J.K. Lin, J.Y. Uan*, C.P. Wu and H.H Huang*, “Direct growth of oriented Mg−Fe layered double hydroxide (LDH) on pure Mg substrates and in vitro corrosion and cell adhesion testing of LDH−coated Mg samples”, Journal of Materials Chemistry, 21 (2011), pp. 5011-5020.
(IF= 5.968, MATERIALS SCIENCE,MULTIDISCIPLINARY, 17/231)
42 Z.L. Hsieh, M.C. Lin and J.Y. Uan*, “Rapid direct growth of Li–Al layered double hydroxide (LDH) film on glass, silicon wafer and carbon cloth and characterization of LDH film on substrate”, Journal of Materials Chemistry, 21 (2011), pp. 1880-1889.
(IF= 5.968, MATERIALS SCIENCE,MULTIDISCIPLINARY, 17/231)
41 H.M. Lin*, S. Kuralay and J.Y. Uan, “Microstructural and Corrosion Characteristics of Iron-Silicon Alloyed Layer on 5083 Al Alloy by Electrical Discharge Alloying Processing”, Materials Transactions, 52 (2011), pp. 514-520.
(IF= 0.699, METALLURGY & METALLURGICAL ENGINEERING, 27/75)
40 D.A. Wang*, C.W. Chao, P.C. Lin and J.Y. Uan, “Mechanical characterization of Friction Stir Spot Microwelds”, Journal of Materials Processing Technology, 210 (2010), pp. 1942-1948.
(IF= 1.570, ENGINEERING,MANUFACTURING, 8/38)
39 M.C. Lin, F.T. Chang and J.Y. Uan*, “Synthesis of Li - Al - carbonate layered double hydroxide in a metal salt - free system”, Journal of Materials Chemistry, 20 (2010), pp. 6524-6530.
(IF= 5.968, MATERIALS SCIENCE,MULTIDISCIPLINARY, 17/231)
38 J.Y. Uan*, J.K. Lin, Y.S. Sun, W.E. Yang, L.K. Chen and H.H. Huang*, “Surface coatings for improving the corrosion resistance and cell adhesion of AZ91D magnesium alloy through environmentally clean methods”, Thin Solid Films, 518 (2010), pp. 7563-7567.
(IF=1.890, MATERIALS SCIENCE, Coatings & Films, 4/18)
37 B.L. Yu, X.L. Pan and J.Y. Uan*, “Enhancement of Corrosion Resistance of Mg-9 wt.% Al-1 wt.% Zn Alloy by a Calcite (CaCO3) Conversion Hard Coating”, Corrosion Science, 52 (2010), pp. 1874-1878.
(IF= 3.734, METALLURGY& METALLURGICAL ENGINEERING, 2/75)
36 B.L. Yu, J.K. Lin and J.Y. Uan*, “Applications of carbonic acid solution for developing conversion coatings on Mg alloy”, Transactions of Nonferrous Metals Society of China, 20 (2010), pp. 1331-1339.
(IF= 0.751, METALLURGY& METALLURGICAL ENGINEERING, 24/75)
35 J.Y. Uan*, J.K. Lin and Y.S. Tung, “Direct growth of oriented Mg-Al layered double hydroxide film on Mg alloy in aqueous HCO3-/ CO32- solution”, Journal of Materials Chemistry, 20 (2010), pp. 761-766.
(IF= 5.968, MATERIALS SCIENCE, MULTIDISCIPLINARY, 17/231)
34 J.Y. Uan*, S.H. Yu, M.C. Lin, L.F. Chen and H.I. Lin, “Evolution of hydrogen from magnesium alloy scraps in citric acid-added seawater without catalyst”, International Journal of Hydrogen Energy,34 (2009), pp. 6137-6142.
(IF= 4.054, ENERGY & FUELS, 12/79)
33 J.Y. Uan*, M.C. Lin, C.Y. Cho, K.T. Liu and H.I Lin, “Producing hydrogen in an aqueous NaCl solution by the hydrolysis of metallic couples of low-grade magnesium scrap and noble metal net”, International Journal of Hydrogen Energy, 34 (2009), pp. 1677-1687.
(IF= 4.054,ENERGY & FUELS, 12/79)
32 M.C. Lin and J.Y. Uan*, “Preparation of bcc Mg-Li-Al-Zn Alloy by Electrolysis in Molten Salt LiCl-KCl and the Alloy’s Electrochemical Performance as Anode Material for Magnesium Batteries”, Applied Electrochemistry,77 (2009), pp. 604-607.
(IF= 1.745, ELECTROCHEMISTRY, 17/27)
31 M.C. Lin, C.Y. Tsai and J.Y. Uan*, “Electrochemical Behaviour and Corrosion Performance of Mg-Li-Al-Zn Anodes with High Al Composition”, Corrosion Science, 51 (2009), pp. 2463-2472.
(IF= 3.734, METALLURGY &METALLURGICAL ENGINEERING, 2/75)
30 J.K. Lin and J.Y. Uan*, “Formation of Mg, Al-hydrotalcite conversion coating on Mg alloy in aqueous HCO3-/ CO32- and corresponding protection against corrosion by the coating”, Corrosion Science, 51(2009), pp. 1181-1188.
(IF= 3.734, METALLURGY & METALLURGICAL ENGINEERING,2/75)
29 J.Y. Wang*, H.J. Tsai and J.Y. Uan, M.S. Wang and S.K. Wu, “Investigation of the Photo-Catalytic Coating on AZ91 Alloy”, Journal of Alloys and Compounds, 467 (2009), pp. 257-260.
(IF= 2.289, METALLURGY &METALLURGICAL ENGINEERING, 4/75)
28 L.W. Lin, J.M. Song*, Y.S. Lai, Y.T. Chiu, N.C. Lee and J.Y. Uan, “Alloying modification of Sn-Ag-Cu solders by manganese and titanium”, Microelectronics Reliability, 49 (2009), pp. 235-241.
(IF= 1.167, ENGINEERING,ELECTRICAL& ELECTRONIC, 112/244)
27 J.Y. Uan*, B.L. Yu and X.L. Pan, “Morphological and Microstructural Characterization of the Aragonitic CaCO3/Mg,Al-hydrotalcite Coating on Mg-9 wt.% Al-1 wt.% Zn Alloy to Protect against Corrosion”, Metallurgical and Materials Transactions A, 39A (2008), pp. 3233-3245.
(IF= 1.545, METALLURGY & METALLURGICAL ENGINEERING, 9/75)
26 J.Y. Uan*, C.F. Li and B.L. Yu, “Characterization and Improvement in Corrosion Performance of a Hot-Chamber Die cast Mg Alloy Thin Plate by the Removal of Interdendritic Phases at Die Chill Layer”, Metallurgical and Materials Transactions A,39A (2008), pp. 703-715.
(IF= 1.545, METALLURGY & METALLURGICAL ENGINEERING, 9/75)
25 C.C. Chang and J.Y. Uan*, “Ductile-to-Brittle Transition for the Aluminum Alloy Contacting to Liquid Gallium Metal”, Journal of Alloys and Compounds, 464 (2008), pp. 146-149.
(IF= 2.289, METALLURGY & METALLURGICALENGINEERING, 4/75)
24 J.Y. Uan*, C.Y. Cho and K.T. Liu, “Generation of Hydrogen from Magnesium Alloy Scraps Catalyzed by Platinum-Coated Titanium Net in NaCl Aqueous Solution”, International Journal of Hydrogen Energy,32 (2007), pp. 2337-2343.
(IF= 4.054, ENERGY & FUELS, 12/79)
23 M.C. Lin, C.Y. Tsai and J.Y. Uan*, “Converting hcp Mg-Al-Zn alloy into bcc Mg-Li-Al-Zn alloy by electrolytic deposition and diffusion of reduced lithium atoms in a molten salt electrolyte LiCl/KCl”, Scripta Materialia,56 (2007), pp. 597-600.
(IF= 2.699, METALLURGY & METALLURGICAL ENGINEERING,3/75)
22 J.K. Lin, C.L. Hsia and J.Y. Uan*, “Characterization of Mg, Al-hydrotalcite conversion film on Mg alloy and Cl- and CO32- anion-exchangeability of the film in a corrosive environment”, Scripta Materialia, 56 (2007), pp. 923-925.
(IF= 2.699, METALLURGY &METALLURGICAL ENGINEERING, 3/75)
21 J.Y. Uan* and H.F. Cheng, “Uniform Equiaxed Grain Structure throughout Thickness of a Hot-rolled 5083 Al-Mg-Mn Alloy Thick Plate after a Tempering Treatment at350°C”, Materials Transactions B, 48 (2007), pp. 178-183.
(IF= 0.903,METALLURGY & METALLURGICAL ENGINEERING, 20/75)
20 J.Y. Uan* and C.C. Chang, “Gallium-induced Magnesium Enrichment on Grain boundary and the Gallium Effect on Degradation of Tensile Properties of Aluminum Alloys”, Metallurgical and Materials Transactions,37A (2006), pp. 2133-2145.
(IF= 1.545, METALLURGY & METALLURGICAL ENGINEERING,9/75)
19 B.L. Yu and J.Y. Uan*, “Sacrificial Mg Film Anode for Cathodic Protection of Die Cast Mg-9wt.%Al-1wt.%Zn alloy in NaCl Aqueous Solution”, Scripta Materialia, 54 (2006), pp. 1253-1257.
(IF= 2.699,METALLURGY & METALLURGICAL ENGINEERING, 3/75)
18 J.Y. Uan*, C.Y. Cho, Z.M. Chen and J.K. Lin, “Precipitate Evolution in Underaged Al-Mg-Si Alloy during Thermal Cycling between 25℃ and 65℃”, Materials Science and Engineering A, 419(2006), pp. 98-104.
(IF= 2.003, MATERIALS SCIENCE, MULTIDISCIPLINARY, 61/231)
17 B.L. Yu and J.Y. Uan*, “Correlating the Microstructure of the Die Chill Skin and the Corrosion Properties for a Hot-Chamber Die Casting AZ91D Magnesium Alloy”, Materials Transactions A, 36 (2005), pp. 2245-2252.
(IF= 1.721, METALLURGY & METALLURGICAL ENGINEERING, 7/76)
16 M.C. Lin and J.Y. Uan*, “Preparation of Mg-Li-Al-Zn Master Alloy in Air by Electrolytic Diffusing Method”, Materials Transactions B, 46 (2005), pp. 1354-1359.
(IF= 0.974, METALLURGY & METALLURGICAL ENGINEERING, 19/76)
15 C.Y. Cho, K.H. Wang and J.Y. Uan*, “Evaluation of a New Hydrogen Generating System: Ni-rich Magnesium Alloy Catalyzed by Platinum Wire in Sodium Chloride Solution”, Materials Transactions B, 46 (2005), pp. 2704-2708.
( IF= 0.974, METALLURGY & METALLURGICAL ENGINEERING, 19/76)
14 C.Y. Cho, J.Y. Uan* and H.J. Lin, “Surface Compositional Inhomogeneity and Subsurface Microstructures in a Thin-Walled AZ91D Plate Formed by Hot-Chamber Die Casting”, Materials Science and Engineering A, 402 (2005), pp. 193-202.
(IF= 2.101, MATERIALS SCIENCE, MULTIDISCIPLINARY, 52/225)
13 J.Y. Uan* and C.C. Chang, “Characterization of Gallium-induced Intergranular Fracture Surface and the Auger Electron Spectroscopic Analysis for Mg Grain Boundary Segregation in AA6061 T4 Al-Mg-Si Alloy”, Materials Transactions B, 45 (2004), pp. 1925-1932. (EI/SCI)
(IF= 0.974, METALLURGY & METALLURGICAL ENGINEERING, 19/76)
12 S.H. Wang, J.Y. Uan*, T.S. Lui and L.H. Chen, “Examination on the Aging and Tensile Properties of Al-Zn-Mg/Al3Ni Eutectic Composite”, Materials Transaction A, communication, 33A (2002), pp. 707-711. (EI/SCI)
(IF= 1.721, METALLURGY & METALLURGICAL ENGINEERING, 7/76)
11 J.Y. Uan*, L.H. Chen and T.S. Lui, “Yield Stress as a Function of Tensile Temperature for Al-(0~0.76wt%) Mg Alloys with [111] Fiber Texture”, Journal of Materials Science Letters, vol. 20 (2001), pp. 2031-2032. (EI/SCI)
10 J.Y. Uan*, T.S. Lui and L.H. Chen, “Microstructural Evolution in the Superplastic-like Deformation of Al-Al3Ni Eutectic Alloy with [111] Fiber Texture”, Materials Transaction A, 32 (2001), pp. 547-555. (EI/SCI)
(IF= 1.721, METALLURGY & METALLURGICAL ENGINEERING, 7/76)
9 J.Y. Uan*, L.H. Chen and T.S. Lui, “On the Extrusion Microstructural Evolution of Al-Al3Ni in-situ Composite”, Acta Materialia, 49 (2001), pp. 313-320. (EI/SCI)
(IF= 3.791, METALLURGY & METALLURGICAL ENGINEERING, 1/76)
8 J.Y. Uan*, T.S. Lui and L.H. Chen, “A Study on the Tensile Deformation of Superplastic-like Al-Al3Ni Eutectic Alloy with [111] Fiber Texture”, Key Engineering Materials, 177-180 (2000), pp. 631-636. (EI/SCI)
7 S.N. Jiang, J.Y. Uan*, T.S. Lui and L.H. Chen, “A Study on the Fracture Characteristic of As-Cast Spheroidal Graphite Cast Iron under Resonant Vibration”, Chinese Journal of Materials Science, 31 (1999), pp. 189-199. (EI/SCI)
6 J.Y. Uan*, T.S. Lui and L.H. Chen, “Effect of Calcium Addition on the Superplastic-like Behavior of Extruded Al-Al3Ni Eutectic Alloy”, Materials Transactions A, 30 (1999), pp. 2258-2260. (EI/SCI)
(IF= 1.721, METALLURGY & METALLURGICAL ENGINEERING, 7/76)
5 J.Y. Uan*, L.H. Chen and T.S. Lui, “A Study on the Texture Hardening of Pure Aluminum and Al-Al3Ni Eutectic Alloy with [111] Fiber Texture”, Scripta Materialia, 36 (1997), pp. 1391-1395. (EI/SCI)
(IF= 2.820, METALLURGY & METALLURGICAL ENGINEERING, 3/76)
4 J.Y. Uan*, L.H. Chen and T.S. Lui, “A Study on the Subgrain Superplasticity of Extruded Al-Al3Ni Eutectic Alloy”, Metallurgical and Materials Transactions A, 28 (1997), pp. 401-409. (EI/SCI)
(IF= 1.721, METALLURGY & METALLURGICAL ENGINEERING, 7/76)
3 J.Y. Uan*, T.S. Lui and L.H. Chen, “Plastic Inhomogeneity and Easy Glide of Aluminum and Al-Al3Ni Eutectic Alloy with [111] Fiber Texture”, Acta Materialia, 45 (1997), pp. 623-634. (EI/SCI)
(IF= 3.791, METALLURGY & METALLURGICAL ENGINEERING, 1/76)
2 J.Y. Uan*, T.S. Lui and L.H. Chen, “Superplasticity-like Behavior of Al-Al3Ni Eutectic Alloy”, Materials Chemistry and Physics, 43 (1996), pp. 278-282. (EI/SCI)
(IF= 2.356, MATERIALS SCIENCE, MULTIDISCIPLINARY, 45/225)
1 J.Y. Uan* and T.S. Lui, “The Relationship between Tensile Properties of Extruded Al-Al3Ni Eutectic Alloy and its Cast Structure Control”, Cast Metals, 6 (1994), pp. 210-216. (EI/SCI)
國內期刊論文/TAIWAN
1 汪俊延*、林宏茂*、林俊凱、林孟昌、林啟明、陳玠宏、曾文甲、吳威德,“精煉脫硫還原渣再利用於其他精煉爐次之脫硫能力研究”,鑄造科技,第267期,2011年12月,20-27頁。
2 林尚秋、林孟昌、汪俊延*,"退火溫度對Mg-9wt.%Li-3wt.%Al-1wt.%Zn合金軋延板材微觀組織與機械性質影響之研究",興大工程學刊,第20卷,第1期,2009年3月,11-21頁。
3 卓錡淵、劉昆達、陳力凡、林恆毅、汪俊延*,"鎂合金廢料/不銹鋼網耦片產氫反應及其加速NaCl水溶液自動置換之研究",鎂合金產業通訊,第43期,2008年11月。
4 鄭凱勵、林俊凱、汪俊延*,"鎂合金表面化成Mg, Al-hydrotalcite皮膜及其耐腐蝕性之研究",鎂合金產業通訊,第42期,2008年08月。
5 林尚秋、林孟昌、汪俊延*,"退火溫度對大氣環境下熔煉Mg-9Li-3Al-1Zn軋延板材微觀組織與機械性質影響之研究",鎂合金產業通訊,第40期,2008年2月。
6 謝仁翔、李青霏、余秉隆、汪俊延*,"藉由犧牲純鎂薄膜保護AZ91D鎂合金之腐蝕性質研究",鎂合金產業通訊,第37期,2007年5月。

研討會論文/Conference


國際會議/INTERNATIONAL
1 J.Y. Uan*, “CO2 (carbon) immobilization on Mg alloy-formation of Mg / hydrotalcite core-shell and hydrotalcite coating for corrosion protection”, the YSR 6th Pan-Yellow Sea Rim International Symposium on Magnesium Alloys, November 22-24, Seoul, Korea.
2 M.C. Lin, J.Y. Uan* and T.C. Tsai, “Fabrication of AlLi and Al2Li3/Al4Li9 intermetallic compounds by molten salt electrolysis and their application for hydrogen generation from water”, 11th ICCE-2011, November 2-5, Taichung, Taiwan.
3 J.Y. Uan*, “純鎂表面Mg-Fe LDH微結構成長控制及其於模擬體液中吸收磷特性研究”, 2011兩岸生物醫用材料研討會, October 15-20, Zhengzhou University, Henan, China.
4 J.Y. Uan*, M.C. Lin and F.T. Chang, “Rapid Synthesis of Li-Al-carbonate layered double hydroxide in a metal salt-free system”, 16th ISIC, May 22-26, Pardubice, Czech, Republic.
5 J.K. Lin and J.Y. Uan*, Chia-Ping Wu and Her-Hsiung Huang*, “Direct growth of oriented Mg-Fe layered double hydroxide (LDH) on pure Mg substrates and in vitro corrosion and cell adhesion testing of LDH-coated Mg samples”, 16th ISIC, May 22-26, Pardubice, Czech, Republic.
6 J.Y. Uan*, Y.S. Tung and J.K. Lin, “Preparation of a Mg alloy / Mg,Al-hydrotalcite Sphere with a Core-shell Structure”, 2010 Asian Forum on Light Metals, Oct. 26-29, Guilin, China.
7 Y.S. Tung, J.K. Lin and J.Y. Uan*, “Preparation of a Mg alloy / Mg,Al-hydrotalcite Sphere with a Core-shell Structure”, the 5th Pan-Yellow Sea Rim International Symposium on Magnesium Alloys, Nov. 16-18, 2010, Taipei, Taiwan.
8 J.Y. Uan*, J. K. Lin, Y. S. Sun and H. H. Huang*, “Surface Modifications of AZ91D Alloy for Biomedical Implant Application”, TACT 2009 International Thin Films Conference, Dec. 13-15, 2009, National Taipei University of Technology, Taipei, Taiwan.
9 J.K. Lin and J.Y. Uan*, “An environmentally clean method to synthesize Mg,Al-LDH conversion coating on Mg alloy in aqueous HCO3-/ CO32- bath” 3rd Asian Symposium on Magnesium Alloys, Sep. 21-23, 2009, Institute of Metal Research, Chinese Academy of Sciences, Shenyang, China.
10 B.L. Yu, J.K. Lin and J.Y. Uan*, “Applications of Carbonic Acid Solution for Developing Conversion Coatings on Mg Alloy” 3rd Asian Symposium on Magnesium Alloys, Sep. 21-23, 2009, Institute of Metal Research, Chinese Academy of Sciences, Shenyang, China.
11 M.C. Lin and J.Y. Uan*, “Preparation of bcc Mg-Li-Al-Zn alloy by electrolysis in molten salt LiCl-KCl and the alloy’s electrochemical performance as anode material for magnesium batteries”, 2008 Joint Symposium on Molten Salts, Oct. 19-23, Kobe, Japan.
12 M.C. Lin, J.Y. Uan* and T.C. Tsai, “A study on Al-Li intermetallic compounds for rapid hydrogen generation in water” HyForum 2008, Aug. 3-6, 2008, Changsha, China.
13 J.Y. Uan*, L.F. Chen, M.C. Lin and H.I Lin, “Hydrogen production by the hydrolysis of metallic couple of magnesium scrap and AISI 304 stainless steel net in sodium chloride solutions”, HyForum 2008, Aug. 3-6, 2008, Changsha, China.
14 J.Y. Uan*, B.L. Yu, C.L. Hsia and T.C. Tsai, “Passivation of Magnesium Alloy in Tap Water and the Corrosion Resistance of the Passive Layer to Protect the Alloy from Corrosion”, 2nd Asian Symposium on Magnesium Alloys”, Oct. 1-3, 2007, Fukuoka International Congress Center, Fukuoka, Japan.
15 J.Y. Uan* and C.C. Chang, “Impact on Property Degradation of Aluminum Alloy in Direct Contact with a Trace Level Gallium”, The 7th International Conference on EcoBalance, Nov. 14-16, 2006, Epochal Tsukuba, Tsukuba, Japan, Poster presentation.
16 M.C. Lin and J.Y. Uan*, “Tensile Properties and Microstructures of the Mg-13Li-9Al-1Zn Alloy Prepared in Air by Electrolytic Diffusing Method”, Magnesium Technology 2006, to be presented in TMS Annual Meeting & Exhibition, eds. A. Luo, N. Neelameggham, R. Beals, Mar. 12-16, 2006, San Antonio, Texas, USA, Oral presentation.
17 B.L. Yu and J.Y. Uan*, “Sacrificial Magnesium Film Anode for Cathodic Protection of Die Casting AZ91D Alloy”, Magnesium Technology 2006, to be presented in TMS Annual Meeting & Exhibition, eds. A. Luo, N. Neelameggham, R. Beals, Mar. 12-16, 2006, San Antonio, Texas, USA, Oral presentation.
18 C.F. Li and J.Y. Uan*, “Selected Etching Surface Treatment for Improving the Corrosion Resistance of Die Cast AZ91D Thin Plate”, Magnesium Technology 2006, to be presented in TMS Annual Meeting & Exhibition, eds. A. Luo, N. Neelameggham, R. Beals, Mar. 12-16, 2006, San Antonio, Texas, USA, Oral presentation.
19 J.Y. Uan*, C.Y. Cho and Kun-Ta Liu, “Recycling of End-of-Life Magnesium Alloy Scraps to Generate Hydrogen Energy”, The 1ST National Conference on Hydrogen Energy and Fuel Cell, Nov. 3-4, 2006, Nantou, Taiwan, Oral presentation.
20 C.Y. Cho, K.H. Wang and J.Y. Uan*, “A Novel Way for Hydrogen Production by Using Ni-rich AZ91D Magnesium Ingot as a Generator”, The 3rd. Workshop on Regional Network formation for Enhancing Research and Education on Materials Engineering and Green Energy, Aug. 7-9, 2005, Ferringhi Beach, Penang, Malaysia, Poster presentation.
21 C.Y. Cho, J.Y. Uan*, H.J. Lin and T.C. Tsai: “Segregations of Aluminum after Solidification: AZ91D Mg-Al-Zn plate Produced by Die Casting and Gravity Casting” , Magnesium Technology 2005, TMS Annual Meeting and Exhibition, eds. N. R. Neelameggham, H. I. Kaplan, and B.R. Powell, Feb. 13-17, 2005, San Francisco, California, Oral presentation.
22 J.Y. Uan* and B.L. Yu, “Characterization of Die Skin Structure and its Effects on the Corrosion Properties of the Hot-chamber Die Casting AZ91D Thin Plate” , Magnesium Technology 2005, TMS Annual Meeting and Exhibition, eds. N. R. Neelameggham, H. I. Kaplan, and B.R. Powell, Feb. 13-17, San Francisco, California, 2005, Oral presentation.
23 J.Y Uan, T.S. Lui and L.H. Chen, “A Study on the Tensile Deformation of Superplastic-like Al-Al3Ni Eutectic Alloy with [111] Fiber Texture”, the proceedings of Asia Pacific Symposium on the Advances in Engineering Plasticity and its Applications: AEPA2000, June 12-16, 2000, Clear Water Bay, Hong Kong.
國內會議/TAIWAN
1 林宏茂*、謝博奇、陳旺志、汪俊延,“利用放電合金化法製備鎂鎳合金粉末之結構特性及除氫性質探討”,中國機械工程學會第二十八屆全國學術研討會,台灣,台中,Dec. 10~11,2011。
2 汪俊延*、吳威德、曾文甲、林宏茂、林啟明、陳玠宏、陳旺志、許家漢、徐郁帆,“盛鋼桶精煉脫硫渣再次利用於鋼水脫硫精煉研究”,台灣鑄造學會一百年度論文發表會,台灣,高雄,Dec. 4,2011。
3 徐郁帆、汪俊延*,“以化成處理法於鎂合金壓鑄飛邊廢料表面形成層狀雙層氫氧化物及此材料吸收水中氟離子之研究”,台灣鑄造學會一百年度論文發表會,台灣,高雄,Dec. 4,2011。
4 林宏茂*、陳旺志、謝博奇、汪俊延,“加工參數對放電合金化法製備鎂鎳合金粉末結構特性及儲氫性質之影響”,台灣鑄造學會一百年度論文發表會,台灣,高雄,Dec. 4,2011。
5 陳玠宏、汪俊延*,“化成處理於純鎂表面生成軟磁性導磁層之研究”, 中華民國防蝕工程學會,台灣,台北,Aug. 18~19,2011。
6 許家漢、汪俊延*,“Li-Al LDH 於 AZ31 鎂合金表面奈米尺度粗糙化應用於抗腐蝕性質”,中華民國防蝕工程學會,台灣,台北,Aug. 18~19, 2011。
7 辜泓熙、汪俊延*、林俊凱、陳玠宏,“以化成處理純鎂表面生成Mg-Fe-CO3 LDH薄膜及在模擬體液中的耐蝕性” ,中華民國防蝕工程學會,台灣,台北,Aug. 18~19, 2011。x
8 黃松輝、呂佳蓮、汪俊延*,“鎂空氣電池電極催化層製作與特性研究”,中華民國防蝕工程學會,台灣,台北,Aug. 18~19, 2011。
9 游世豪、汪俊延*,“鎂合金在有機酸中產生氫氣” ,中華民國防蝕工程學會,台灣,台北,Aug. 18~19, 2011。
10 陳玠宏、汪俊延*,“氧化處理對提升純鎂於模擬體液中抗蝕性之研究”, 台灣鎂合金年會,台灣,台北,Jun. 24, 2011。
11 許家漢、汪俊延*,“Li-Al LDH 於 AZ31 鎂合金表面奈米尺度粗糙化”, 台灣鎂合金年會,台灣,台北,Jun. 24, 2011。
12 徐郁帆、汪俊延*,“以化成處理法在鎂廢料表面形成層狀雙層氫氧化物及此材料吸收水中氟離子之研究”, 台灣鎂合金年會,台灣,台北,Jun. 24, 2011。
13 汪俊延*、林俊凱、陳玠宏、辜泓熙,“以化成處理純鎂表面生成Mg-Fe-CO3 LDH 薄膜及在模擬體液中的耐蝕性”, 台灣鎂合金年會,台灣,台北,Jun. 24, 2011。
14 林俊凱、汪俊延*,“AZ91D鎂鋁合金表面化成Mg,Al-hydrotalcite保護層-探討其後續塗裝層附著性與耐蝕性之研究”, 中華民國防蝕工程學會民國99年度年會,台灣,台南,Aug. 27~28, 2010。
15 林俊凱、汪俊延*,“AZ91D鎂合金表面快速形成Mg-Al hydrotalcite保護層及探討後續塗裝層的附著性與耐蝕性”,鎂合金年會,台灣,高雄,Sep. 8, 2010。
16 陳玠宏、汪俊延*,“以化成處理於純鎂表面生成軟磁性導磁層之研究”,鎂合金年會,台灣,高雄,Sep. 8, 2010。
17 張嘉修、謝宗憲、汪俊延*,“橫錯振動軋延製程 (TWVSR) 對 AZ31 鎂合金軋延性、組織及拉伸性質之研究”,材料年會,台灣,花蓮,Nov. 26~28, 2009。
18 汪俊延*、林俊凱、孫瑛穗、楊惟恩、黃何雄*,“表面處理對AZ91D鎂合金初期耐蝕性質及細胞貼附之影響”,中華民國防蝕工程學會民國98年度年會,台灣,台中,Aug. 27~28, 2009。
19 陳力凡、林孟昌、汪俊延*、林恆毅,“鎂合金廢料與不鏽鋼在不同濃度氯化鈉溶液中的伽凡尼腐蝕行為之研究”,中華民國防蝕工程學會民國98年度年會,台灣台中,Aug. 27~28, 2009。
20 潘信良、汪俊延*,“以Ca2+/HCO3–化成法於鎂合金表面製備Calcitic CaCO3硬質層及其抗腐蝕之研究”,台灣鎂合金協會會員大會暨論文發表會,台灣,台北,Jun. 26, 2009。
21 林俊凱、汪俊延*,“鎂合金表面形成Mg, Al-hydrotalcite保護層於5wt.%氯化鈉溶液耐蝕性質之研究”,第六屆海峽兩岸腐蝕與防護研討會,台灣花蓮,Nov. 9~12, 2008。
22 陳力凡、林孟昌、卓錡淵、劉昆達、汪俊延*,“鎂合金廢料/不銹鋼網耦片的產氫反應及不鏽鋼網觸媒的重複使用性探討” ,第六屆海峽兩岸腐蝕與防護研討會,台灣花蓮,Nov. 9~12, 2008。
23 林尚秋、林孟昌、汪俊延*,“退火處理對大氣環境下熔煉Mg-9wt.%Li-3wt.%Al-1wt.%Zn 軋延板材微觀組織與機械性質” ,台灣鎂合金協會會員大會暨論文發表會,台灣台北,Jan. 4, 2008。
24 鄭凱勵、林俊凱、汪俊延*,“鎂合金表面化成Mg,Al-hydrotalcite皮膜及其耐腐蝕性之研究”,台灣鎂合金協會會員大會暨論文發表會,台灣台北,Jan. 4, 2008。
25 蔡承洋、林孟昌、汪俊延*,“LAZ1231鎂合金作為鎂電池陽極材料的電化學表現之研究”中華民國防蝕工程學會民國96年度年會,台灣桃園,Aug. 23~24, 2007。
26 劉昆達、卓錡淵、汪俊延*,“轉換鎂合金廢料為再生氫氣能源之研究”,中華民國防蝕工程學會民國96年度年會,台灣桃園,Aug. 23~24, 2007。
27 陳思豪、林俊凱、汪俊延*,“披覆碳酸鈣層之MRI-153M鎂合金抗腐蝕性質研究”,2006能源與光電薄膜科技研討會暨國科會專題計畫研究成果發表會,台灣南投,Oct. 27~28, 2006。
28 劉又菁、林俊凱、汪俊延*,“碳酸化成溶液之Mg-Al-O皮膜之耐蝕性研究”,2006能源與光電薄膜科技研討會暨國科會專題計畫研究成果發表會,台灣南投,Oct. 27~28, 2006。
29 林俊凱、汪俊延*,“Mg,Al-hydrotalcite Conversion Coating on AZ91D Magnesium Alloys for Corrosion Protection”,2006能源與光電薄膜科技研討會暨國科會專題計畫研究成果發表會,台灣南投,Oct. 27~28, 2006。
30 余秉隆、夏靜鈴、汪俊延*,“鎂合金於水中之自我保護機制及應用該機制於抗腐蝕之研究”,台灣鎂合金協會2006會員大會暨論文發表會,台灣,台北福華國際文教會館,Jun. 1, 2006。
31 李青霏、汪俊延*、顏秀崗,“MgO薄膜對AZ91D鎂合金基材腐蝕性質之影響”,中華民國防蝕工程學會民國九十五年度年會,台灣,台南,Aug. 17, 2006。
32 李青霏、汪俊延*,“Chromate-free Surface Treatments for the Corrosion Resistance of Die Cast AZ91D Thin Plate”,中華民國材料學會年會民國九十五年度年會,台灣,台南,Nov. 24, 2006。
33 林孟昌、汪俊延*,“在大氣環境下以電解擴散法製備Mg-Li-Al-Zn母合金”,台灣鎂合金協會會員大會暨論文發表會,台灣台北,Jan. 24, 2005。
34 林俊凱、汪俊延*,“無需SF6保護氣氛之重力鑄造AZ91低溫固溶化處理顯微組織及抗腐蝕性研究”,台灣鎂合金協會會員大會暨論文發表會,台灣台北,Jan. 24, 2005。
35 王國皇、余秉隆、林俊凱、汪俊延*,“熱室法壓鑄AZ91D薄板表面凝固層之組織觀察及腐蝕性質研究”,台灣鎂合金協會會員大會暨論文發表會,台灣台北,Jan. 24, 2005。
36 余秉隆、卓錡淵、汪俊延,"AZ91D壓鑄件不同位置之成份分析及腐蝕性質研究",中華民國防蝕工程學會民國九十二年度年會,台灣,屏東墾丁,Aug.21, 2003。
37 L.H. Chen, T.S. Lui, J.Y. Uan,"A Study of Microstructural Evolution and Deformation Mechanism on the Al-Al3Ni extrusion alloy", the proceedings of CSMS conference, December 26-27, 1999, Hsinchu, Taiwan, pp.456-458.
38 S.S. Wong, J.Y. Uan, T.S. Lui, L.H. Chen, “The Effect of Nickel on the Aging Behavior and Tensile strength of 7N01 Alloy”, the proceedings of CSMS conference, October 3-4, 1996, Hsinchu, Taiwan, pp. 461-462.
39 J.Y. Uan, T.S. Lui and L.H. Chen, “A Study on Texture Hardening of Extruded Aluminum Alloy”, the proceedings of CSMS conference, October 3-4, 1996, Hsinchu, Taiwan, pp. 421-422.
40 J.Y. Uan, T.S. Lui and L.H. Chen, “High Strain Rate Superplastic Behaviors of Al-Al3Ni Eutectic Alloy”, the proceedings of IUMRS-ICA-94 conference, December 14-18, 1994, Hsinchu, Taiwan.
41 J.Y. Uan, T.S. Lui and L.H. Chen, “High Strain Rate properties of Extruded Al-Al3N Eutectic Alloy”, the proceedings of the conference on superplastic forming and diffusion bounding, 1994, June 8-9, Taipei, Taiwan, pp. 65-73.
42 S.L. Kwun, J.Y. Uan and T.S. Lui, “The Effect of precipitate on the Superplastic Behavior of AA6061 Alloy”, the proceedings of CSMS conference, April 30-May 1, 1993, Hsinchu, Taiwan, pp. 1.115-1.116.
43 J.Y, Uan, L.H. Chen and T.S. Lui, “A Study on 600°C Oxidation Behavior of Fe - 32Mn - 9.3Al - 1C - 1.2Si Alloy”, the proceedings of CSMS conference, April 26-28, 1991, Tainan, Taiwan, pp. 44-45.

專利/Patent


專利/Patent
1 林孟昌,林育立,紀岩勳,汪俊延:「多孔基材的修飾方法及經修飾的多孔基材」,中華民國專利 (2014),專利號碼:I449808。
2 汪俊延,林俊凱:「快速製備磷結合劑的方法及含磷結合劑的醫藥組合物」,中華民國專利 (2013),專利號碼:I382842。
3 汪俊延,吳威德,曾文甲:「盛鋼桶鋼水精鍊脫硫劑及脫硫方法」,中華民國專利 (2013),專利號碼:I398525。
4 汪俊延,林俊凱,陳玠宏:「生醫材料及其製備方法」,中華民國專利 (2013),專利號碼:I405596。
5 汪俊延,吳威德,曾文甲:「盛鋼桶鋼水精鍊脫硫劑組成物及脫硫方法」,中華民國專利 (2013),專利號碼:I408237。
6 汪俊延,林孟昌,張富存:「快速製備層狀氫氧化物的方法」,中華民國專利 (2013),專利號碼:I414483。
7 汪俊延,林孟昌,謝智倫:「形成自組裝層狀雙氫氧化物薄膜的方法」,中華民國專利 (2013),專利號碼:I418511。
8 汪俊延,林俊凱:「以產業回收之二氧化碳製備鎂合金表面抗腐蝕結構之方法」,中華民國專利 (2010),專利號碼: I325445。
9 汪俊延,鄭旭峰:「防止金屬熱軋延版材翹曲的方法」,中華民國專利 (2008),專利號碼: I302854。
10 汪俊延,朱益宏,陳國探:「車架管件超塑成型製法」,中華民國專利 (2008),專利號碼: I298655。
11 汪俊延,鄭旭峰:「改善金屬熱軋延板材晶粒結構分佈不勻的方法」,中華民國專利 (2008),專利號碼:I298269。
12 汪俊延,林孟昌:「以電解擴散法在大氣環境下製作鎂-鋰合金及其設備」,中華民國專利 (2007),專利號碼:I284153。
13 汪俊延,李青霏:「鎂合金表面處理方法」,中華民國專利 (2006),專利號碼:I262219。
14 呂傳盛,汪俊延:「超塑性鋁合金及其製法」,中華民國專利 (1996),專利號碼:83103876。